Rendering of the aircraft

In a comment on the post about my first Depron RC-plane I was asked for the plans. I’m afraid I don’t have the nice 1:1 print on multiple A4 plans that most people are used to, but if someone have a good guide on how I create those kinds of prints I’ll be happy to create one. But for now I can provide the drawing with measurements.

The drawing of my depron plane (all measures in mm)

And the same drawing as a PDF

I measured up these parts on a piece of cardboard to use as a template. Especially since you need two of all parts except the one in the lower right.

I used the kind of cardboard that you can buy at a painters shop to protect your floor while painting.